|
|
VACUUM PORCELAIN FURNACES THERMODENT Т-04, T-05 |
Т-04 and Т-05 is the 4-th generation of a THERMODENT series Furnaces developed and manufactured by our company , registered and enabled in medical practice in Ukraine (official registration #6020/2007).
High reliability (with 18 month warranty), heating element KANTHAL (Sweden) covered by quartz tube, compactness and simplicity of servicing provide high firing quality while working with various ceramic masses.
Features:
• 150 archival factory programs for following ceramic masses:
VITA OMEGA
VITA OMEGA 900
VITA VM 13
VITA VMK 68
VITADUR ALPHA |
DUCERAM PLUS
DUCERAM LFC
ULTROPOLINE
NORITAKE EX-3
FINESSE |
HERA CERAM
IVOCLAR
IVOCLAR IPS
IPS CLASSIC
DUCERAM Kiss |
• 100 user programs:
- 1 – 79 usual programs
- 80 - 96 with additional stages of cooling and holding for tempering process
- 99 - specialized program for temperature calibration
- 00 - specialized program for configuring of the furnace
• Protection from power supply failures. Short failures don’t corrupt firing cycle and vacuum .
• High measurement accuracy of temperature of ±1°С in wide supply voltage range (187 to 244 V AC) due to selfcalibration eliminate the need of periodical calibration by silver.
• Nonvolatile memory
• Vacuum system with electronic sensor provides:
- vacuum level control
- automatic breaking of program on lose of vacuum in firing chamber
• Possibility of survey and modification of parameters during program running
• Wide functional possibilities due to independent programming of 14 parameters
• Night mode
• Fast copying of both user and archival programs
Main technical data |
Т-04 |
Т-05 |
Temperature range,°С |
30 - 1150 |
30 - 1150 |
Heating rate, °С/min. |
2 - 230 |
2 - 230 |
Firing chamber dimensions, mm
diameter
height
|
100
50 |
100
50 |
Overal furnace dimensions , mm
height
depth
width |
440
300
306 |
280
400
275 |
Weight (max), kg |
15,5 |
15,5 |
Power supply, V; Hz AC |
220, 50 |
220, 50 |
Power consumption without vacuum pump (max), W |
1100 |
1100 |
Programmed parameters
Parameter |
Range |
Unit |
Drying time 1-st stage (firing table at lower position) |
0 - 3600 |
Sec |
Drying time 2-st stage (closing time of firing chamber) |
10 - 900 |
Sec |
Holding time at Start Temperature |
0 - 3600 |
Sec |
Start temperature |
200 - 800 |
°С |
Heating rate |
1 - 230 |
°С/min. |
Firing(High) temperature |
300 - 1150 |
°С |
Firing (holding at high temperature) time |
0 - 3600 |
Sec |
Cooling rate |
30 - 230 |
°С/min. |
Opening temperature |
300 - 1150 |
°С |
Opening time |
10 - 900 |
Sec |
Temperature of switching ON of vacuum pump |
200 - 1150 |
°С |
Temperature of switching OFF of vacuum pump |
200 - 1150 |
°С |
Firing time under vacuum |
0 - 600 |
Sec |
Vacuum level |
0 (750 mm Hg),
96 - 108, FULL |
Relative units,
(100=60 mm Hg) |
|